Sewing Trousers

Sewing pants is pretty easy. Sewing is mainly affected by the material from which the Sewing Trousers are made. Here are tips for sewing pants from both stretch fabric and denim.

Pants in Elastic Fabric

Pants are easiest to make from stretchy fabric like a leotard and College. When elastic sewing fabrics, an elastic stitch must be used in the sewing machine for advanced sewers https://thesewingstuffs.com/best-sewing-machine-for-advanced-sewers/. Depending on the model of the machine, several models of flexible stitches can be found on it.

If you use a straight stitch and zigzag at the edges in stretch fabrics, likely, the stitch will not stay, but as the fabric stretches, the stitch will break. Therefore, in elastic fabrics, one must remember to use an elastic stitch. For elastic fabrics, you should use overlock stitches, which are the best and most durable options.

The patterns of the trousers should be arranged parallel to the thread, and in the case of trousers, the direction of the thread is along the leg. This is important because if the pants are cut in the direction of the twisted thread, the pants will also start to twist.

If, on the other hand, the patterns are cut in the wrong direction of the thread, i.e., not along the leg, the pants will not become elastic. The correct thread direction can still be checked by stretching the elastic fabric sideways, and the fabric flap located on the right or left edge.

The fabric is then folded twice. A pattern is placed on the fabric, and the trousers are cut along the patterns about 0.5 to 1 cm from the pattern. The seam allowance is thus left for about a cent. In addition, the elastic waist and leg openings are cut from the trousers. They usually have their dimensions and formulas, for example, in formula sheets.

To keep the components from becoming jumbled, the front pieces can be marked, for example, by attaching pin pins to them. This way, when sewing, you no longer have to think about which was the front piece and which was the back piece. So after cutting the patterns, you should have two front pieces, two back pieces, two legs elastic, and one waist elastic.

The actual sewing process is then started. It starts by sewing the side seams of the front and back together and preferably from the bottom up. When sewing, you should be careful that the right sides of the fabrics are facing each other. The inner seams of the legs are then sewn.

The same sewing steps are repeated for the other legs, i.e., the side seams are sewn first and then the inner seams. Now you should have two gifts. One of the legs is turned in the right direction and inserted into the other leg. As a result, the two gifts are nested, and their right sides are facing each other. The branch points should also now face each other. Button pins should also be used here, allowing the fabrics to stay well in place at the required points. The branch seam and then the elastic is sewn.

When sewing elastics, the right sides must also be held against each other. They are sewn into rings on the legs and twisted twice so that the seam should remain inside. The front and rear parts, as well as the centers of the middle part and the sides, must be marked on the elastic.

These points are marked with safety pins, and the needles should be located at regular intervals in the elastic. The elastics are attached to the trousers, with them facing upwards. The fastening is done by threading the elastic inside the trousers. The seam of the spring should be aligned with the seam of the back piece, the front seam of the sign, and the side seams of the side marks, whereby the spring stretches evenly. When the elastic is in place, it can be sewn closed. The elastic should be stretched when sewing to make it the same size as the waist.

Finally, the leg openings are sewn into the trousers. If you want to be certain about the length of your jeans, measure them, you should adjust them at this stage and finish the legs only after the adjustment.

Especially if it’s the first pants you’ve sewn, fitting may make sense. The seam of the leg extension can be located either in the middle of the leg of the back piece or at the inner seam of the leg. When the elastic is properly in place, it is fastened in place at the seams of the leg with pin needles. It can then be sewn on again by stretching the elastic. This is also repeated for the second leg. Now the pants are ready.

Jeans Trousers

By sewing your jeans yourself, you are sure to make them fit and look good. While the idea of making jeans yourself may sound challenging, it’s very easy. The sewing process takes place in the same way as with elastic fabrics. However, denim has certain characteristics that need to be considered when sewing.

First, a thicker and firmer needle should be used in the sewing machine. A needle suitable for jeans is a 100-digit, which gives a neat finish. Thinner needles may break or bend when sewing denim.

The jeans have thick seams that can be easily overcome by stopping in front of the seam and placing a patch under the presser foot folded several times. It allows the presser foot to rise to the height of the seam, and no actual bump is formed. Once you are on top of the seam, move the patch to the front of the presser foot to keep the foot horizontal and the stitch clean.

If you want jeans stitching the same as the finished denim jeans, you might want to use the sewing machine thread on top of thick and plain sewing thread as a bobbin thread. Several stitching threads are especially suitable for jeans, and you can make stitching in, for example, the traditional yellow color.

Of course, the jeans should have buttons. The metal denim button is struck into the jeans to leave the fabric between the parts, just like in a rivet. Jeans can also be tailored to your preferences, such as adding ornamental stitching to the back pockets.

Drawing the decorations on strong paper, such as copy paper, is a good way to start. Cut out the embellishments and needle the pattern into the jeans. After that, you just sew on the outline of the pattern with a stitching thread. You can also pimp your jeans with different iron-on fabric brands.

You can finish the legs of the jeans in the end. It’s worth remembering that denim shrinks a bit during washing, so they should be washed at least once before the legs are shortened.

As for the length of the jeans, it is also worth noting that the fabric modifies in use, and often, the jeans start bagging at the knees, which shortens the legs a bit.

Jeans should be fitted before sewing their legs. In jeans of the right length, the legs touch the ground at the heel. When the length is in place, subtract about a centimeter and mark it. A seam is sewn at that point. The edge of the hem on the wrong side should be at the same point as the mark on the right side of the jeans for the shortened length. Once in place, the legs are needled and finally sewn with a sewist. Jeans that are too long can be easily shortened later with denim seam.

 

Read More

Leave a Comment

Your email address will not be published. Required fields are marked *